Performance Max Brand Exclusions: How to Set Them Up and Measure Impact

Short answer
How do you set up Performance Max brand exclusions?
Performance Max brand exclusions use an account-level brand list, applied to a campaign, to stop ads from serving on branded searches. You open the campaign's Settings tab, expand Additional settings, choose Brand exclusions, select your list, and save. As a result, you can measure branded and non-branded demand separately.
This guide covers one task. You'll learn how to keep a Performance Max campaign from showing ads to people searching for your own brand or other brands, and what that does to your reporting. We walk through setup step by step. Then we explain honestly when this setting helps and when it hurts.
Who is this guide for?
It's for advertisers running Performance Max who look at the report and wonder, "This looks great, but is it really bringing in new customers?" We don't repeat full campaign setup here; that lives in our Performance Max setup guide for ecommerce. Instead, this article focuses on one adjustment you make while the campaign is already running.
Why do brand exclusions come up at all?
Performance Max is an automated campaign type that runs across Search, Shopping, YouTube, and other Google channels at once. That automation can also show ads to people who already know you and search for you by name. Most of those people would have reached your site without an ad.
Here's where the problem starts. Branded searches usually convert at a very high rate. So the campaign report looks impressive, but much of that shine comes from demand you already owned. In other words, the campaign may take credit for existing demand instead of finding new customers.
Brand exclusions are Google's official tool for untangling this. However, they aren't right for every account. Therefore, decide on your goal first. Do you want to protect branded traffic, or do you want a clean read on new customer demand?
To answer that, the owner, the marketing lead, and whoever reads the reports should sit down together. One person tends to watch revenue, while another watches incremental impact. If leadership only tracks total sales, the value of separating brand traffic may not be obvious at first. Still, it becomes decisive when you plan budget increases, because nobody wants to scale spend that doesn't add new customers.
What is a brand list, and how does it work?
A brand list is a set of brand names you create at the account level and then apply to one or more campaigns. According to the Google Ads Help Center, you build the list once and attach it to whichever campaigns need it.
However, you can't type in any word you like. You pick brands from Google's brand library. If your brand isn't there, you can submit a request. The Help Center lists qualifying signals such as a logo, a trademark, a domain name, or a product name that dominates the packaging. For small and medium-sized businesses, a business name can also qualify.
Matching matters as well, because it decides what gets blocked. Per the official page, brand lists use the latest version of broad match. So a single brand name can match variants in different languages and scripts. That said, variants that share no common word, such as differently named product lines, need to be added one by one.
Which inventory do Performance Max brand exclusions affect?
Be careful here, because scope is easy to misread. According to Google Ads Help, Performance Max brand exclusions work on Search and Shopping inventory, and some official pages also list YouTube search inventory. Because the scope can change over time, confirm the current details in the Help Center.
In practice, this means exclusions don't filter Display or YouTube feed impressions based on brand intent. In those placements, the user isn't running a search. So don't read brand exclusions as "this cuts every brand-related impression."
In addition, the official page describes an option that lets Shopping ads keep appearing on searches that mention excluded brands. That way, you can pull text ads off brand searches while keeping product ads there. This option matters most for ecommerce stores with a product feed.
How do you build a brand list step by step?
Menu labels change from time to time, so treat these steps as general direction. For exact button text, check your account interface and the Help Center.
- Open the brand lists area in your shared library or tools menu.
- Create a new brand list and give it a clear name, such as "Our brand names."
- Type your brand name in the search box and pick the correct brand from the library.
- If your brand doesn't appear, use the request option and enter accurate details.
- Add sub-brands and product names that share no common word, one at a time.
- Save the list.
Note that a new list doesn't affect any campaign yet. It only takes effect once you attach it. This distinction matters, because you can reuse the same list across many campaigns.
Name your lists carefully as well. Over time, an account collects several: your own brands, reseller brands, and competitor brands you've found irrelevant. If you keep each group in its own list, you can attach them in different combinations. For example, one campaign can exclude only your brand, while another excludes both your brand and the reseller brands. That flexibility also makes later tests much easier.
How do you apply a list to an existing Performance Max campaign?
The Help Center describes this path for an existing campaign: go to Campaigns, open the Settings tab, select the campaign, expand Additional settings, choose Brand exclusions, select your lists, and click Save.
- Go to your campaigns list and open the Settings tab.
- Select the Performance Max campaign.
- Expand Additional settings.
- Open Brand exclusions and check one or more lists.
- Decide whether Shopping ads may still appear on excluded brand searches.
- Save, then write down the date of the change.
That last step looks minor, but it's critical for measurement. Without the change date, you can't run a clean before and after comparison. When you build a new campaign, the same option sits under More settings during setup.
How do you apply exclusions to several campaigns in bulk?
If you run several Performance Max campaigns, attaching lists one by one takes time. The official page also covers bulk editing. On the Settings tab, you select multiple campaigns, click Edit, choose the option to change brands, and add brand exclusions.
Also, bulk editing includes a preview step. Don't skip it. For instance, if you accidentally selected your brand Search campaign too, the preview shows you. That way, you avoid a serious mistake like excluding your own brand from your brand campaign.
After a bulk change, spot-check a few campaign settings. Also, confirm in the change history that the edit applied to every campaign. In short, bulk actions save time, but they don't replace verification.
Next, check whether the Shopping option stayed consistent. You might want Shopping ads to keep serving on brand searches in some campaigns but not others. A single bulk choice can flatten that difference. So edit campaigns that need different behavior in separate batches.
How do brand exclusions differ from negative keywords?
Both block unwanted searches, but they work differently. A negative keyword blocks the exact text you enter, based on its match type. A brand list, on the other hand, recognizes the brand entity in Google's library and tries to catch misspellings and variants in other languages too.
| Criterion | Brand exclusions | Negative keywords |
|---|---|---|
| What it blocks | Searches that clearly refer to a library brand | The text you enter, by match type |
| Misspellings and variants | Tries to catch them through broad match logic | You add each variant yourself |
| Where you set it | Account-level list, attached to campaigns | Campaign, ad group, or account level |
| Shopping exception | Available as an option in Performance Max | Not available |
| Scope | Search and Shopping inventory | Depends on campaign type |
| Upkeep | Low, since Google maintains the library | High, since you track new variants |
We explain the general logic of negatives in our negative keywords guide. Here, we only stress one difference. Brand lists are designed to recognize brand intent, while negative keywords rely on text matching.
Should you exclude your own brand?
There's no single right answer; it depends on your account structure. If you run a separate brand Search campaign, letting Performance Max enter the same searches pits two campaigns against each other. In that case, excluding your brand from Performance Max keeps brand traffic in one controlled campaign.
On the other hand, if you don't have a brand campaign, an exclusion may leave you with no ad at all on brand searches. If competitors bid on your name, that space goes to them. We cover your options in that situation in our guide to competitors bidding on your brand.
So the practical rule is simple. First, build or check a separate Search campaign that covers brand searches. Then exclude your brand from Performance Max. That way, brand traffic doesn't disappear; it simply moves to the right campaign.
When does it make sense to exclude other brands?
Sometimes the issue isn't your brand but someone else's. For example, if you're a reseller, showing ads on the manufacturer's brand searches may conflict with your agreement. In that case, you add that brand to a list and exclude it.
Similarly, certain competitor searches may bring you irrelevant traffic. If someone is looking for a specific competitor and wants to find them, your ad may get the click but not the sale. Excluding those searches sends budget toward more interested shoppers.
Still, don't make this call without data. First, check search term insights to see which brand searches are spending money. Then add the ones that don't convert. That way, your exclusions rest on your own account data rather than guesswork.
One more note. Excluding a competitor's brand is separate from whether you mention that brand in ad copy. Exclusions only decide which searches trigger your ads. Using another company's name in ad text falls under different policy rules, so handle it carefully.
How do you spot brand traffic in your reports?
First, before you exclude anything, confirm the problem exists. Start with search term insights for Performance Max. This report summarizes which search categories bring traffic to the campaign.
If categories with your brand name, its misspellings, or your product names rank near the top, the campaign is entering brand traffic. Next, look at impression share for your brand Search campaign. If brand campaign impressions dropped noticeably after Performance Max launched, the two may be sharing the same traffic.
Consider an example scenario. Your brand campaign's clicks fell after Performance Max went live, yet total branded site traffic stayed flat. In that case, traffic didn't vanish; it just changed hands between campaigns. To read impression share correctly, see our impression share guide.
In short, save both reports before you turn exclusions on. Then you'll know how big the problem is, and you'll have a baseline for comparison later.
How does separating brand traffic change measurement?
This is the real value of brand exclusions. When brand and non-brand traffic mix in Performance Max reports, it's hard to see the campaign's true contribution. For example, you may seem to hit your target ROAS easily, while much of that comes from customers who searched for you anyway.
Once you exclude your brand, the Performance Max report reflects only non-brand demand. That new number will likely look lower. However, the drop isn't a loss. It's a more honest measurement. Therefore, when you make decisions, look at the combined total of your brand campaign plus Performance Max.
Keep this split in mind when you analyze ROAS changes. Our guide to diagnosing a ROAS drop helps you separate the sources of change. For a broader view, marketing efficiency ratio shows overall marketing return across channels.
What if performance drops after the exclusion?
The official page is clear on this. Brand settings limit a campaign's reach, and performance may decrease. So a drop in conversions and ROAS after the change shouldn't surprise you.
What matters is understanding where the drop comes from. Ask these questions in order:
- Did brand campaign conversions rise over the same period?
- How do combined conversions for both campaigns compare with before?
- Are Performance Max non-brand conversions stable or falling?
- Does your bid target still fit the new reality?
If the total held steady and the brand campaign picked up the conversions, you're fine. Measurement simply got clearer. If the total dropped sharply, check your brand campaign's coverage and budget. You may also need to lower your Performance Max ROAS target to a level it can reach without brand traffic. We explain those bidding mechanics in our target CPA and target ROAS guide.
How do you build a before and after comparison?
First, use the change date as a fixed reference point. Pick two periods of equal length, one before and one after. Also, note factors like seasonality, promotions, and sale events.
Line up these metrics side by side: brand campaign impressions, clicks, and conversions; the same metrics for Performance Max; and combined cost and conversion value for both. Here's an example scenario. If Performance Max conversions fall while brand campaign conversions rise, traffic has simply shifted.
To simplify the math, use our ROAS calculator. For a broader account snapshot, our Google Ads audit tool is a good starting point. Then you base decisions on the whole account, not one campaign report.
Also, don't judge too early. Automated campaigns like Performance Max need time to adjust after a change. If you decide on a few days of data, you may mistake a temporary swing for a lasting result. So be patient and account for seasonal effects.
Can you test brand exclusions on a small scale first?
Yes, and if you run several Performance Max campaigns, we recommend it. Rather than turning exclusions on everywhere, try one campaign first. Then you can see the effect under more controlled conditions.
For a test, follow this order:
- Pick a campaign with moderate traffic and budget.
- Export the report for the period before the change.
- Attach the brand list to that campaign only.
- Don't change the bid strategy at the same time.
- Once enough data builds up, read total conversions and the brand campaign together.
Step four matters most. If you change exclusions and bid targets together, you can't tell which change drove the result. If the test looks good, roll the setting out to other campaigns with bulk editing.
Does the approach differ for ecommerce and service businesses?
The core logic is the same, but priorities differ. Ecommerce Performance Max usually runs on a product feed, and Shopping ads drive much of the traffic. So the option that keeps Shopping ads on brand searches is a key decision for online stores.
For instance, if shoppers search your brand plus a product name, a Shopping ad shows price and image right away. Cutting that ad may open space for competing stores' product ads. Therefore, pulling text ads off brand searches while keeping Shopping ads is often a balanced starting point in ecommerce.
Service businesses, by contrast, have no feed, and traffic comes mainly from Search and other channels. The key question is whether your brand campaign fully covers brand searches. If it does, exclusions clarify measurement. If not, strengthen the brand campaign first. For Shopping basics, see our Google Shopping guide.
Can you handle this yourself, and when should you get help?
Technically, creating a list and attaching it takes a few minutes. Follow the steps above and you can do it yourself. The real challenge isn't the setting. It's interpreting what happens next.
For example, you need to judge whether total conversions fell, whether the brand campaign filled the gap, and whether bid targets need resetting. That requires reading several campaigns' data together. At that point, google ads management support helps you base the decision on measurement instead of guesswork.
If you'd rather go it alone, do at least this much. Before the change, save a screenshot or export of the current state. Then compare using the same metrics afterward.
Why don't ads show on brand searches after Performance Max brand exclusions?
Usually, this means the setting works as intended. If you excluded your own brand, Performance Max no longer serves on brand searches. Without a separate brand campaign, you'll have no ad on those searches at all.
However, losing your ad on brand searches isn't always what you want. If competitors bid on your name, their ads show while you sit in organic results. So confirm your brand campaign is enabled, funded, and built on the right keywords.
Other causes can also hide an ad: budget, approval, targeting, or billing. To work through them in order, use our checklist for Google Ads not showing.
How do location and audience settings fit in?
Brand exclusions aren't the only setting that shapes who a campaign reaches. Location targeting, language, and audience signals also change the traffic mix. For example, if your location option is set too broadly, the campaign may get impressions from outside your target country.
So if you see unexpected traffic after an exclusion, check location settings too. We explain the options in our presence vs. interest guide.
Also, if you added existing customer lists as audience signals, Performance Max may lean toward those people. Brand exclusions limit that effect on Search, but not on other channels. Therefore, if new customer acquisition is the goal, review the campaign's customer acquisition settings as well.
Do brand settings work differently in Search campaigns?
Yes, a little. According to the official page, Search campaigns support both brand inclusions and brand exclusions, while Performance Max supports only exclusions. When a campaign uses both, exclusions take priority.
In addition, Google has been moving Search brand settings into the AI Max settings panel. The official page states that this change doesn't affect Performance Max. We cover that Search setup in our AI Max guide.
The practical takeaway is this. You build a brand list once, but you use it for different goals. In Search, inclusions can create a campaign that only takes brand traffic. In Performance Max, exclusions keep brand traffic out.
How do you keep your brand lists current?
In practice, a brand list isn't a set-and-forget setting. Your business may launch a new product brand, retire a sub-brand, or take on a new reseller agreement. Each change calls for a review.
- Add new product names or sub-brands when they launch.
- Update reseller brands when agreements change.
- Read search term insights monthly and note brand variants that aren't on your list.
- Check the status of pending brand requests in the library.
That way, your exclusions keep reflecting your real brand structure. Otherwise, an outdated list either blocks new product searches by mistake or blocks nothing at all. Tying this review to your calendar, such as the first week of each month, makes it easy to catch small changes early.
What are the most common mistakes?
From our field experience, these are the mistakes we see most often with this setting. Each one is easy to prevent.
- Excluding your own brand without a separate brand campaign.
- Not recording the change date, which makes comparison impossible.
- Reading only the Performance Max report instead of total performance.
- Leaving the bid target high, as if brand traffic were still included.
- Selecting the brand Search campaign by mistake during a bulk edit.
- Assuming brand exclusions also cut Display and video impressions.
What these mistakes share is treating the setting in isolation. In reality, brand exclusions work alongside the account's other campaigns. Review this list once before setup and once after. For broader budget leaks, see our guide to costly Google Ads mistakes.
How do you decide on Performance Max brand exclusions?
You can boil the decision down to three questions. First, do you have a separate campaign that covers brand searches? Second, does seeing Performance Max's true new customer contribution matter to you? Third, can you accept a short-term dip in reported numbers in exchange for clearer measurement?
If you answer yes to all three, exclusions are likely the right move. If any answer is no, fix that gap first. For example, if you don't have a brand campaign, build it before you turn exclusions on.
Our team treats this decision as part of account structure, not as a single setting. To separate brand traffic, clarify reporting, and reset bid targets, take a look at our google ads agency services. We don't promise ROAS or sales. Instead, we show clearly where each number comes from.
For official sources, the Google Ads Help Center pages on applying brand exclusions and brand settings are the most reliable starting points.
Core guide: What Is Digital Marketing? Its types, examples and how it is done, on one page with an interactive film that travels through the brain.



