Google Ads Audit: How to Run a Deep Account Review Step by Step

Short answer
How do you run a Google Ads audit?
A Google Ads audit is a structured review of your account's measurement, structure, targeting, keywords, ads and bids, backed by evidence, that shows where budget leaks and where opportunity goes unused. First you verify measurement, then you read the structure, and last you judge the recommendations.
So this guide covers the deep review. If you only want a fast first pass, our article on 10 quick checks for a healthy Google Ads account is the quicker route. Instead, here we show which report to open in each layer, what to look for and how to record each finding.
To take a first snapshot of your account, open the google ads audit tool. Then move through the layers below.
In short, what separates a deep review is evidence. However, saying "the negative list is weak" is not enough. Instead, write which search terms eat budget, in which campaign, and what you expect to change when you fix them. Then the report becomes a decision document, not an opinion. Also, make sure you can sum up each finding in one sentence. If you cannot, then you probably have not understood it yet.
What access and data do you need for a Google Ads audit?
Prepare before you start. Because without preparation, findings turn into guesses. If possible, ask for read only access, because you do not want to change a setting by accident during the review.
Preparation checklist:
- Get read only access to the account.
- Then pick one date range and use it in every report.
- Also note the list of conversion actions and the analytics property linked to the account.
- Next, open the change history to see who changed what and when.
- Finally, write the business goal: leads, sales value or something else.
The last item matters most. That is because a good setting depends on the goal. So the right setup for an online store may be wrong for a local service account.
However, you should not paste reports with customer personal data into screenshots or documents in raw form. Use counts and summaries instead.
Which layers make up a deep Google Ads audit?
Splitting the review into eleven layers keeps you from skipping anything. Specifically, each layer starts with a question, checks one red flag and rests on one report. The table below is the backbone of this guide.
| Layer | Question to ask | Red flag | Where to look |
|---|---|---|---|
| Measurement | Does the system count conversions correctly? | Double counting, inactive action | Conversion actions |
| Structure | Are campaigns split by intent? | Mixed ad groups | Campaign and ad group lists |
| Targeting | Do the right people see the ads? | Extra networks, wrong location | Campaign settings |
| Bidding | Does the strategy fit the goal? | A hard target with no data | Bid strategy report |
| Keywords | Are match types under control? | Unmanaged broad match | Keyword list |
| Search terms | Are real searches relevant? | Irrelevant terms | Search terms report |
| Ads | Do the messages answer the intent? | One ad, missing assets | Ad and asset reports |
| Page | Does the landing page keep the promise? | Weak page experience | Quality Score components |
| Budget | Where is the loss? | Impressions lost to budget | Impression share |
| Recommendations | Which ones fit the goal? | Blindly applied advice | Recommendations page |
| Tracking | Is there a record and a process? | No change notes | Change history |
Keep the order, because if measurement is wrong, the reading of the next ten layers goes wrong too.
Use this table as a worksheet. Then add three columns per row: finding, evidence and priority. Then date every finished row, so you can see what changed at the next review. Also share the rows with your team, since two pairs of eyes catch the setting that one pair misses.
How do you review the account structure in a Google Ads audit?
First, structure is the skeleton of the account. In a good structure, each campaign serves one goal and each ad group serves one intent. In a bad one, different intents sit in the same group, so no ad text fits any of them well.
Check these points:
- Are brand searches and generic searches in separate campaigns?
- Does each ad group hold closely related keywords?
- Are campaign names and labels clear and consistent?
- Do duplicate campaigns for the same goal eat each other's budget?
Example scenario: in one account, "corporate website" and "cheap website" searches sit in the same ad group. Because the intents differ, the ad text fits one or the other. So the fix is to split the groups by intent.
For measures and examples, see Google Ads account structure: campaigns and ad groups. If you need a full rebuild, structure is the first topic in our google ads management work.
Why is conversion tracking the first and most critical step?
If measurement is wrong, every other finding misleads you. The Google Ads Help Center explains that conversions show which keywords, ads, ad groups and campaigns drive valuable customer actions, and that they support Smart Bidding. Conversions can come from website actions, app activity, phone calls, offline imports or partner bookings.
The same page lists troubleshooting checks: confirm the tag is installed, confirm the conversion action shows as active, and check the Conversion Linker tag if you use Google Tag Manager. Also, read the official wording on the about conversion measurement Help page.
In practice, ask these questions:
- Does every conversion action stand for a real business result?
- Do two different actions count the same result?
- Does the counted number match your own records?
However, here is a simple way to verify. Count last week's real orders or forms from your own records, then compare them with the conversions Google Ads shows. If the gap is large, check the tag first and the action's counting setting second. Also, do not send test messages to real customers while you check. Use your own test entry.
If you suspect missing conversions, follow the order in GA4 conversions missing: causes and fixes.
How do you audit primary and secondary conversion actions?
The same Google page explains that you group conversions into actions and mark each as primary, which is used for bidding, or secondary, which is for observation only. However, misconfiguring this can hinder Smart Bidding.
So write each action's role on its own row during the audit:
- Does the primary action truly reflect the business goal?
- Are weak signals, such as page views or scrolls, set as primary?
- Do you keep secondary actions for observation only?
- If you need enhanced conversions, did you set them up?
Setting a weak signal as primary tells the bidding system, "bring me more of this." As a result, you get plenty of conversions with little value.
For setup steps on enhanced conversions, see Google Ads enhanced conversions setup guide. Also, if your setup handles personal data, check consent and your privacy text. This is not legal advice.
Which targeting mistakes should you look for in campaign settings?
However, campaign settings are a quiet source of loss. For example, a single checkbox can send a large share of budget to the wrong place. So read these four settings in every campaign:
- Network: are networks you do not want switched on in a search campaign?
- Location: do people outside your target area also see the ads?
- Language: does the ad language match your audience's language?
- Ad schedule: is showing outside business hours what you want?
In location settings, however, the difference between presence and interest matters most. Here we only give the audit question: do interest based people outside your target area see the ad?
Example scenario: in a search campaign, extra networks stay on. So the ads may show on sites you never expected. Then clicks go up, but conversion quality drops. The fix is simple: limit the network setting to your goal and watch the conversion rate for two weeks.
Next, write findings in a table: campaign name, setting, current state and desired state. Then your team knows exactly what to change.
How do you judge bidding strategy and budget in an audit?
First, the bid strategy decides what the system optimizes. If your goal is leads but the strategy optimizes for clicks, you have a mismatch. Conversely, a hard target on a campaign without enough conversion data can choke the system.
Ask these questions:
- Is the strategy tied to the primary conversion action?
- Has the campaign collected enough conversion data?
- Is the target value realistic, or does it starve the system?
- If you changed the strategy, did you wait out the learning period?
On the budget side, if a campaign shows a limited by budget status, you may need to shift funds to the strong campaign. To frame daily spend, use the Google Ads budget calculator.
We give no figures in this section, because the right budget depends on your business, your margin and your competition.
How do you audit keywords and match types?
Also, the keyword list is the intent map of the account. In an audit, check three things: match types, overlaps and data gaps.
When match types are unmanaged, then the system may show ads on searches you did not intend. Broad match in particular can be risky without strong measurement and a maintained negative list. We covered it in broad match in Google Ads: how it works and its risks.
Checklist:
- Which keywords sit in which match type?
- Do several keywords compete for the same search?
- Are there keywords with no impressions or almost no data?
- Did generic non brand words slip into the brand campaign?
Collect the results in a table and write a decision on each row: keep, fix or pause. Otherwise, any finding without a decision gets argued again at the next meeting. For example, a keyword with no impressions may be silent because its match type is too narrow or its bid is too low. So investigate the cause before you delete it.
How do you read the search terms report in an audit?
The search terms report shows the actual searches that triggered your ads and how they performed. The Google Ads Help Center adds that the report can also give ideas for ad copy and landing page content. Also, it includes match type and keyword columns. The keyword column is hidden by default, and you can turn it on through the column settings under attributes.
If you see an irrelevant term, then the page says to add it as a negative keyword. You can also change the match type of existing keywords based on which ones work for which searches. In the report editor view, you cannot add keywords or negatives directly, so you add them separately. For the official text, see the about the search terms report Help page.
In the audit, sort terms into three clusters: relevant and converting, relevant but not converting, and irrelevant. Then the third cluster goes to the negative list. For a step by step method, read Google Ads search terms report analysis.
How do you audit the negative keyword list?
The negative list is the protection layer for your budget. In fact, a missing or neglected list is the most common audit finding. Still, adding negatives is not a one time job. It is a regular habit.
Audit questions:
- Do you have account level and campaign level lists?
- Which match types did you write them in?
- Does a very broad negative also block valuable searches?
- Do you turn new search terms into negatives at regular intervals?
However, watch out for overly aggressive negatives. For example, blocking the word "free" often makes sense. However, if your service includes a free trial, the same word also cuts a valuable search. So write the reason next to every negative.
For methods and examples, see the Google Ads negative keywords guide.
How do you evaluate ad copy and assets in an audit?
Ad copy is the bridge between the searched intent and your page. In an audit, you want to see several different messages in each ad group, because groups running a single ad cannot learn.
Points to check:
- Do headlines reflect the keyword's intent?
- Did you repeat the same message again and again?
- Are sitelinks, descriptions and other assets complete?
- Does the ad match the promise on the landing page?
- Are there claims you cannot verify, such as "best" or "guaranteed results"?
In short, the last item matters for policy and for trust. Never put a claim in ad copy that you cannot verify.
While you read ads, ask: does a person who clicks know what they will find on the page? If not, click through rate may look fine while conversion stays low. Example scenario: the ad says "free shipping," but the page does not mention it. So the visitor loses trust right away.
How do you read Quality Score and landing page experience in an audit?
According to the Google Ads Help Center, Quality Score is a diagnostic tool that estimates how your ad quality compares with other advertisers. It appears on a 1 to 10 scale at the keyword level and has three components: expected clickthrough rate, ad relevance and landing page experience. Also, Google rates each one as above average, average or below average.
The same page says Quality Score is not an input in the ad auction, so do not optimize it as a KPI. Use it to find improvement opportunities. However, if a keyword shows a dash, there is not enough data. Read the official wording on the about Quality Score Help page.
In the audit, focus only on components rated below average:
- First, if expected CTR is low, move the ad text closer to the intent.
- Second, if ad relevance is low, make the groups narrower.
- Third, if landing page experience is low, match the page to the ad and review speed.
For more, read Google Ads Quality Score: what it is and how to improve it.
How do you use optimization score and recommendations in an audit?
The Google Ads Help Center describes optimization score as an estimate of how well your account is set to perform. It runs from 0 to 100 percent and the system calculates it in real time from your statistics, settings and status, tied to your business goal. Also, each recommendation shows how much it would raise the score.
The same page says you can dismiss recommendations that do not seem relevant, and that applying one recommendation can invalidate others, so uplifts may not add up. It also notes that the score is not used in Quality Score. See the about optimization score Help page for the source.
So do not apply recommendations blindly in an audit. Run each one through this filter:
- Does it match my business goal?
- Does it raise the budget, and am I ready for that?
- Does it widen matching, and is my negative list ready?
- Is auto apply on?
For the last question, read how to turn off auto applied recommendations.
How do you read impression share and budget loss?
Impression share tells you how often your ad showed out of the searches it could have shown for. However, the loss can come from budget or from rank. In an audit, finding which loss dominates decides the fix.
If budget loss is large, then move funds to a campaign that converts well, or cut a poor one. Instead, if rank loss is large, review ad quality and bids.
| Loss type | Likely cause | First thing to check |
|---|---|---|
| Budget loss | The daily budget runs out early | Campaign budget, hourly spread |
| Rank loss | Low quality or weak bid | Quality Score components, bid strategy |
| Data loss | The system undercounts conversions | Conversion action status |
For more, see what is impression share in Google Ads. Example scenario: a brand campaign that converts very well gets capped by budget around midday. Shifting budget to it is often the first move.
Also, do not read these figures from one daily table. Look at several weeks of trend, because season, campaign changes and competitor moves create daily swings.
How do you review device, location, time and audience breakdowns?
Totals hide breakdowns. So in an audit, split the report by device, location, weekday and hour. These breakdowns often show a loss or an opportunity that stayed hidden in the account.
Ask the same question for every breakdown: is the share of spend close to the share of conversions in this slice? A big gap means you found a candidate for adjustment.
For example, if a service business gets many clicks on mobile but no phone calls, the mobile page may lack a call button. In another account, you may see high spend and zero conversions at certain hours, which brings the ad schedule into question.
Also, the same rule applies to audiences. If you added an audience for observation only, wait for enough data before you tie results to bidding. So you avoid wrong calls from a small sample.
Note: do not adjust on thin data. For example, a tiny slice with zero conversions may be chance. So wait until enough data builds up and change things in small steps. After each change, watch the result for at least a few days.
How do you prioritize Google Ads audit findings?
At the end, you hold dozens of findings. However, trying to fix all of them at once prevents you from learning which fix worked. So rank them by impact and effort.
| Priority | Rule | Example finding |
|---|---|---|
| Now | High impact, low effort | Add negatives for irrelevant searches |
| Plan | High impact, high effort | Rebuild conversion tracking |
| Opportunity | Low impact, low effort | Complete missing assets |
| Hold | Low impact, high effort | Full rebuild of tiny campaigns |
For each finding, write three fields: evidence, proposed change and expected effect. Do not promise the effect in numbers. An honest line such as "loss may shrink" is enough.
To pre-check your findings, compare them with the output of a google ads account audit. Afterward, you can measure gains with the ROAS calculator. However, if conversion value is not set up correctly, ROAS misleads too.
How do you write a Google Ads audit report?
In short, a good report makes decisions easier. So it does not need to be long, but it must be clear. Build it in three parts: summary, findings and action plan.
Report outline:
- Summary: the overall state of the account and the three most critical findings.
- Findings table: layer, evidence, proposed change and priority.
- Action plan: who changes what, and when.
- Measurement plan: which report shows the result of each change.
Also, support every finding with a screenshot or a report summary. However, hide rows that contain customer personal data. When you present the report, state clearly the difference between a recommendation and a sure outcome.
Keep the language plain as well. Because a manager may not know account terms. So explain each finding in one paragraph in this order: what happened, why it matters, what we should do. Put the technical detail in an appendix table.
Also, the report should not be a one time document. If you use the same template at the next audit, you can compare the two periods easily. That comparison also shows which change worked.
How often should you repeat a Google Ads audit?
A deep audit is not a job you do once and forget. Also, doing it weekly is excessive. The sensible approach sets two rhythms: a light weekly check and a deeper periodic review.
Weekly check: budget exhaustion, new search terms, ad approval status and sudden shifts in conversion count. Keep this short.
Periodic review: all eleven layers in this guide. However, if the account is large or you made many changes, repeat it sooner.
Certain events also trigger an audit:
- A sudden, unexplained drop in performance.
- After a new conversion tracking setup.
- Following a major campaign or site change.
- A change of agency or account manager.
While you look for the cause of a drop, our Google Ads mistakes that waste budget article gives a fast checklist. Over time, collect your findings in a log. Then you notice repeating problems. So a log needs only a date, a change and a reason.
Which problems show up most often in a Google Ads audit?
Accounts differ, but findings look surprisingly alike. Most problems cluster in measurement and targeting.
The most frequent findings:
- Weak signals counted as primary conversions.
- A negative list that never gets maintenance.
- Unwanted networks left on at campaign level.
- Ad groups running a single ad.
- Automatic recommendations applied without thought.
- No notes in the change history.
In short, none of these needs a magic fix. You can correct most of them in one working day. The hard part is turning the correction into a habit.
Note: do not hunt for someone to blame with each problem you find. However, the goal of an audit is not to judge the past. It is to make the next budget work better. This approach helps the team share findings instead of hiding them.
How do you build a 30 day plan after the audit?
After you list the findings, move to action. First, a thirty day plan splits the findings across four weeks and lowers risk. Then pick a theme for each week and make changes in small batches.
- First, in week one, fix measurement and clarify the primary conversion actions.
- Second, in week two, update negative lists and correct network and location settings.
- Third, in week three, complete ad copy and assets, and improve landing page match.
- Finally, in week four, review bid strategy and budget decisions.
So date every change in your log. Also, do not make large changes on the same day, or you cannot tell which one made the impact. Also respect learning periods: if you changed the bid strategy, do not draw conclusions within a few days.
At the end of the plan, hold a short closing meeting. What changed, what did you measure, what is still waiting? Then turn the output into the starting note for the next audit.
When do you need outside help with a Google Ads audit?
In practice, you can apply most steps in this guide yourself. However, support makes sense if your account is large, your measurement setup is complex or you lack time to run the audit on a schedule. Also, a neutral second look shows blind spots.
At Talha Aslan and team, we start an audit with measurement. Then we review structure, searches and ads. Then we prioritize findings and turn them into a clear action plan. However, we do not guarantee results or costs. Instead, we keep the process recorded and traceable.
Ask yourself whether you can assign someone to apply the findings and track the outcome. If not, then even the best report stays on the shelf. Therefore, outside help adds steady follow up, not only knowledge.
To see the scope, browse our google ads agency services. Then, to avoid missing quick wins, read the short list in our sibling article on the top 5 missed opportunities in Google Ads.
Core guide: What Is Digital Marketing? Its types, examples and how it is done, on one page with an interactive film that travels through the brain.



