Digital Marketing

Is Your Google Ads Account Healthy? 10 Quick Checks

Talha Aslan 18 min read 4 views

Short answer

Is your Google Ads account healthy?

Is your Google Ads account healthy? It is when ten basics work at once: billing and account status, conversion tracking, conversion goals, auto-tagging, ad status, location, search terms, budget, recommendations and landing page. So a ten-minute pre-check catches the urgent problems.

Keep reading for the full details and examples

This list is not a full audit. Still, in most accounts the problems that quietly drain budget hide in these ten places. For example, an account with a broken tag looks fine on the surface, but its smart bidding learns from wrong data.

In this guide, we explain each check, where to look and what the warning sign is. For a deeper pass, you can also use our free google ads audit tool.

First, run the list in order. The first two checks decide how far you can trust the other eight. If billing or tracking is broken, looking at budget, location or recommendations makes little sense. Each check has one question, one place to look and one warning sign, so you can make progress even if you only have an hour.

Is your Google Ads account healthy after a 10 minute check, or do you need a full audit?

First, a pre-check is a screening test. Like a nurse who takes your blood pressure and temperature, it is fast and shows whether something urgent is wrong. However, those readings do not replace lab results.

A full audit goes through keyword, campaign and search term reports line by line. It shows which keyword spends without converting, which campaign loses ground to budget limits, and whether the bidding strategy fits the data. Also, that work takes hours.

The pre-check has a different job. In other words, you catch the most expensive and quietest mistakes in ten minutes without leaving the account. So you learn whether there is an urgent fire before you commit to a deeper review.

The time estimate is a starting range based on field experience, not a guarantee. If your account is large, each check can take longer. In that case, split the check by campaign.

Also keep in mind that a brand-new account makes some checks meaningless. A few days after launch, conversion data is thin. For the first weeks, run only the billing, tracking and tagging checks, and repeat the rest once data builds up.

What should you prepare before you start?

First, prepare three things before you begin. First, make sure you have at least read access to the account. If you work with an agency, see how to give agency access to Google Ads for the steps.

Second, choose a date range. The last full thirty days works for most accounts. However, if a campaign or holiday week falls inside, note it separately, because unusual weeks distort budget and conversion readings.

Third, write your goal in one sentence: "This account should bring this many leads or sales per month." Without a goal, you cannot say which setting is healthy. For example, if your goal is a set number of bookings, click count alone will mislead you.

Also, do not fix things the moment you find them. Write them down first, then rank them. Changing settings without a record can hide the original problem, and you will also forget who changed what and when. If you want a professional to run the account, our google ads management service takes that work off your hands.

Check 1: Are billing and account status clear of problems?

First, start with the simplest place. Does your account show any warning about payment or account status? A payment problem can stop your ads. Likewise, an account restriction can affect every campaign.

Look at the alerts and notifications area in the account. Is the payment method valid? Also, is the payment profile complete? Then check whether the account status looks normal. Screen names change over time, so look for the relevant section in the panel.

The warning sign is clear: your campaigns look eligible, but impressions or spend have stopped. In that case, check billing and account status first.

Especially in accounts that several people access, a card may have expired. Also, warning emails often land in a shared inbox that nobody reads. So make sure the address that receives account notices is current.

If your account is suspended, stay calm and avoid shortcuts that break the rules. Opening a new account to dodge the problem violates policy and counts as circumventing the system. Instead, read our guide on what to do when a Google Ads account is suspended instead. No team can guarantee the outcome, because Google makes the decision.

Check 2: Does conversion tracking work?

Because of that, conversion tracking is the heart of the account. For example, smart bidding learns which clicks create value from this data. If tracking is broken, the system optimizes the wrong thing.

First, look at the status of each conversion action. Google Ads Help says a "no recent conversions" status is not always a tracking error. Low traffic or campaigns that do not optimize for conversions can cause it as well. However, statuses such as inactive or needs attention usually point to a tag problem. See the conversion goals help page for details.

Then verify the tag with Google Tag Assistant. After a fix, wait 24 to 48 hours for data to settle.

We list the typical causes of tracking errors in why Google Ads conversion tracking goes wrong. Read that first, and then come back to this list.

Also, a simple way to confirm tracking is to trigger a test conversion on your own site. Clicking your ad and completing the form shows whether the tag fires. However, if you do not want to spend budget on your own clicks, verify with the tag tool instead. Never send test messages to real customers or use real personal data for testing.

Check 3: Are your primary and secondary conversions right?

However, not every conversion steers bidding the same way. According to Google Ads Help, primary actions are the ones that bidding targets when you select that goal. Secondary actions are observe-only and receive no budget allocation.

This split matters in practice. For example, if you mark page views or button clicks as primary, the system looks for easy clicks instead of real customers. As a result, you see many "conversions" but no sales.

So ask yourself: are all my primary actions steps that truly earn money? Phone calls, form submissions and purchases are usually primary. Scrolling and video views typically stay secondary. Ask the same question in your team meeting too, because marketing and sales often count a different step as a "conversion."

If a campaign uses a goal that differs from the account default, check each campaign's goal separately. A change affects bidding behavior everywhere that goal applies.

There is also a value question. Do you give every conversion the same value? If a phone call and a purchase are not worth the same, bidding cannot know that. Therefore, enter a reasonable value estimate if you have one. If you do not, at least rank your conversion actions by importance.

Check 4: Is auto-tagging on?

In short, auto-tagging is the bridge that connects a click to a conversion. Google Ads Help explains that after a click, auto-tagging adds a click identifier (GCLID) to your page address. With it, you can track conversions across browsers and import Google Analytics data.

Also, it is on by default for new accounts. However, older accounts or accounts where someone changed the setting may have it off. So check this option in the account settings. For details, read the auto-tagging help page.

However, pay attention to one point: if your site uses redirects, the identifier must reach the final page. If a redirect drops the parameter, conversions will not match. Clicking your own ad and looking at the address bar is a quick test. Some sites reject unknown parameters, though. If you get an error when you click, the help page says to turn auto-tagging off and ask your web developer to allow URL parameters.

The warning sign: in Analytics, your Google Ads traffic appears under "direct" or "other." That points to a tagging or redirect issue. In addition, offline conversion tracking also depends on this setting.

Check 5: Are your ads and assets eligible to run?

Ad status tells you whether your ad is really running. The Google Ads Help page on ad status lists the states: eligible, eligible (limited), disapproved and others. A disapproved ad gets no impressions.

On the Ads page, look at the status column. If you see disapproved or limited ads, add the "Policy details" column, which explains why. Follow the steps on the ad status help page to add it.

Remember too that paused ads, or ads in a paused campaign, show as not eligible. That is not a policy problem. A limited ad runs only in some situations, for example because of restrictions such as trademark use. Reviews usually take one business day, according to the same page.

If your ads include images or videos made with AI, review the labeling setting for those assets as well. Our sibling article, Google Ads AI transparency labels, explains this in detail.

The warning sign: many ads sit in disapproved or limited status. If destination errors cause it, read Google Ads destination not working.

Check 6: Does your location setting match your target?

The location setting decides who can see your ad. Google Ads Help says the default and recommended option reaches people who are in your chosen area or who show interest in it. That coverage can be wide.

If your service covers only one city or district, this default can bring irrelevant clicks. For example, a business that serves only Chicago can still get clicks from people elsewhere who search for Chicago. Those clicks are not malicious, but you pay for visitors you cannot serve.

To check, open the location settings and look at two things. Are the targeted areas correct? Is there an area you should exclude? The help page also says that targeting relies on user settings and behavior, so it is not 100% accurate. See the location targeting help page for details.

The warning sign: some of your clicks or leads come from outside your service area. In that case, review the location option and monitor performance. For businesses with a narrow service area, this setting directly affects budget efficiency.

Check 7: Are your search terms relevant?

The search terms report shows the real searches that triggered your ads. According to Google Ads Help, it helps you see which searches performed and lets you add irrelevant ones as negative keywords. See the search terms report help page for details.

The report hides low-volume terms for privacy. Therefore part of your spend may look unexplained. Still, you catch irrelevant searches quickly among the terms you do see.

Look at the top terms by spend for the last thirty days. Queries that ask for something you do not sell, ask for free options or look for jobs are warning signs. To exclude them, see our negative keywords guide. For reading the report itself, we wrote a piece on search terms report analysis.

In addition, irrelevant terms usually get a low click-through rate. A ctr calculator helps you check that quickly.

Check 8: Do budget and bidding fit your goal?

Budget and bidding are the engine of the account. Ask two separate questions. First, is the budget enough for your goal? Second, does the bidding strategy fit the conversion data you have?

On the budget side, does your best campaign run out of money early in the day? If so, the winner may be missing opportunities. On the other hand, if a weak campaign eats most of the budget, you should shift the split. To estimate a target budget, use our free google ads budget calculator, and read how to set a Google Ads budget for a framework.

On the bidding side, smart bidding strategies need enough conversion data. If you have very few conversions, they can swing widely. Check the current requirement in Google Ads Help.

Also ask a practical question: which campaign takes the most spend, and does it serve my goal? If most spend goes to broad, non-brand searches, do those searches carry buyer intent? The answer is the strongest signal for changing the budget split.

The warning sign: the budget is constantly tight, but cost sits far above your target. In that case, go back to Checks 2 and 3, because the problem usually lives in the conversion data.

Check 9: Are recommendations and optimization score under control?

Optimization score is Google's estimate of how well your account is set up. Google Ads Help says the score runs from 0% to 100% and comes from your statistics, settings, status and the estimated impact of recommendations. It does not affect Quality Score.

The key point: you do not have to apply recommendations. The help page suggests reviewing them regularly, but you can dismiss an irrelevant one. In fact, you can reach 100% by applying or dismissing every recommendation. So the score is not the only measure of quality. See the optimization score help page for details.

If an auto-apply setting is on, check which types are on. Think twice before you hand high-impact changes, such as budget and bidding, to automation. We explain the steps in how to turn off auto-apply recommendations.

The goal of this check is not a higher score but a conscious decision. Understand why a recommendation appears. Does it suggest a new keyword, a budget increase or an ad text change? Each type carries different risk. Dismissing a recommendation that does not fit your goal is a healthy habit.

Check 10: Do your ad message and landing page match?

The last check asks what happens after the click. An ad makes a promise, and the landing page must keep it. Otherwise, you get clicks but no conversions.

Click your own ad and look at three things. Does the page load fast? Does the offer from the ad appear on the first screen? Do the phone number and the form work comfortably on a phone?

Our sibling page on ad to landing page message match covers the match in detail. For the Quality Score side, how to improve Google Ads Quality Score helps.

The warning sign: click-through rate looks good, but form submissions are very low. This usually points to a message mismatch or a slow page.

Page speed deserves attention as well. Read more in how landing page speed affects Google Ads performance. Opening the page on your phone and filling in the form yourself is often the fastest diagnosis.

Is your Google Ads account healthy: how do you read the scoring table?

The table below summarizes the ten checks at a glance. Mark each row as "healthy" or "alarm." With six or more alarms, fix Checks 1 to 4 first. With one or two alarms, your account is generally in good shape, but you may still leak money in those areas.

CheckWhere to lookHealthy signAlarm sign
1. Billing and accountAlerts and notificationsNo warnings, spend flowingImpressions or spend stopped
2. Conversion trackingConversion action statusActions active, data flowingInactive or needs attention
3. Conversion goalsPrimary and secondary splitOnly real business actions primaryPage views marked primary
4. Auto-taggingAccount settingsOn, parameter reaches the final pageOff or lost in redirects
5. Ad statusStatus and policy detailsAds eligibleMany disapproved ads
6. LocationLocation and exclusion settingsMatches the service areaClicks from outside the area
7. Search termsSearch terms reportRelevant termsFree or job searches
8. Budget and biddingBudget status, strategyStrategy fits the dataTight budget, cost above target
9. RecommendationsOptimization score, auto-applyRecommendations applied or dismissed on purposeAuto changes you never reviewed
10. Page and messageLanding page, speedMessage matches, page fastHigh clicks, low submissions

In what order should you fix the problems you find?

Do not try to fix everything at once. Order matters, because some problems sit on top of others.

  1. Fix billing and account status first. If ads do not run, the other settings mean nothing, because there is nothing to measure without impressions.
  2. Next, fix conversion tracking and auto-tagging. Optimization on broken data gives weak results, so these two items are the most critical link.
  3. Then clean up conversion goals, meaning primary and secondary.
  4. Resolve disapproved ads and policy issues.
  5. Update the location setting and the negative keywords.
  6. Review budget and bidding strategy.
  7. Leave automatic recommendations and landing page experience for last.

After each change, wait a few days and watch the effect. That way you see which step worked. Also avoid putting two changes on the same day. For example, if you change the location and the bidding strategy together, you cannot tell which one made the difference.

Smart bidding can also enter a new learning period after big changes. Therefore wait at least a week or two to judge the impact. Record each change with its date, and interpreting results gets easier.

What are the limits of a 10 minute check?

The pre-check scans the skeleton of the account but does not show the detail inside. Knowing this protects you from false confidence. In other words, even if everything looks green, a deeper analysis may still find problems.

The pre-check does not show:

  • Which keyword spends without converting.
  • Whether the same keyword competes across several ad groups.
  • Which campaign collects needless clicks through broad match.
  • Which keywords have a cost far above the campaign average.

The answers live in the reports. So if the pre-check raises an alarm, or if results have stalled, run a deeper report-based analysis. Our guide to Google Ads mistakes that waste budget lists the common ones.

Also, as an account grows, the pre-check falls short. For accounts with many campaigns, a regular audit calendar is safer. For instance, a monthly pre-check and a quarterly deep analysis is a reasonable rhythm. These intervals are a starting suggestion from field experience, so adjust them to your account size.

How do you move from the pre-check to a deeper review with the audit tool?

If the pre-check raised alarms, the next step is a report-based analysis. Open the google ads account audit page and upload the keyword and campaign reports you export from your account. You can add the search terms report as well.

The tool processes your files in the browser, and the page says the files are not sent to a server. Then enter your brand terms and the period length, and change the thresholds if you need to.

You get a health score out of 100, an estimated monthly wasted spend and findings ranked by urgency. For each finding, the tool lists the affected spend, the threshold and a recommended action. You can also export the findings.

Findings include low Quality Score, duplicate keywords, spend without conversions and conversion tracking issues. The monthly estimate is a prioritization aid, not an exact figure. Therefore read the results together with your own goals.

Handle findings in order of urgency. First solve the tracking and wasted spend findings, and then move to quality and structure. Before you pause the candidates the tool exports, review each keyword against your goal, because some keywords play a role in the customer journey even if they do not sell directly.

How often should you ask whether your Google Ads account is healthy?

A monthly rhythm works for most accounts. Put a recurring reminder in your calendar and run the checks in the same order every time.

In addition, repeat the check right away in these cases:

  • When you update the site or publish a new page.
  • When you launch a new campaign, or when you change the budget noticeably.
  • Whenever you add or remove a conversion action or a tag.
  • If performance changes suddenly, meaning cost rises or conversions fall.

Keep a short record after every check. Three months later, you can see how often the same problem came back. As a result, you also find the area that needs a root-cause fix.

A good record also matters when you work with an agency, because it shows what changed and when. Moreover, knowledge does not disappear when someone leaves the team.

What do you do when the check turns up a problem you cannot solve alone?

You can solve many problems with the steps in this guide. Fixing a tag, adding a negative keyword or changing a location setting is usually in your hands.

Some situations need expertise, though. If your tracking architecture is tangled, your bidding strategy keeps swinging, or the account carries years of old settings, an outside view makes a quick difference. Because separating intertwined problems takes time and experience. Fixing several areas at once also raises the risk of a wrong move.

At that point, Talha Aslan and our team can help. To see how we set up, monitor and keep improving ad accounts, review our google ads agency services page. To understand the scope, you can also read what Google Ads consulting includes.

No team can guarantee a specific result. We only help you set up measurement correctly, spend budget on purpose and make decisions from data.

Core guide: What Is Digital Marketing? Its types, examples and how it is done, on one page with an interactive film that travels through the brain.

Frequently Asked Questions

How often should I run a Google Ads health check?
Run it monthly. Also repeat it right after any big change, such as a new campaign, a site update, a budget increase or a conversion setup change. A broken tag or a wrong setting can quietly burn budget for weeks. A recurring calendar reminder is usually enough to keep the habit alive.
Does a 10 minute check replace a full account audit?
No. The quick check scans the basics and shows whether something urgent is wrong. A full audit goes deeper into keyword, campaign and search term reports. If the quick check raises an alarm, or if results have stalled for a long time, move on to a report based analysis with more detail.
Does "no recent conversions" mean my tag is broken?
Not always. According to Google Ads Help, low traffic or campaigns that do not optimize for conversions can cause it too. However, statuses such as inactive or needs attention usually point to a tag problem. Verify the tag with Google Tag Assistant, and allow 24 to 48 hours after any fix.
Do I have to push my optimization score to 100%?
No. Google Ads Help recommends reviewing recommendations regularly, but it does not require you to apply them all. You can dismiss an irrelevant one. The score changes when you apply or dismiss recommendations, and it does not affect Quality Score. So judge each recommendation against your own business goal.
Can a wrong location setting waste my ad budget?
It can. The default and recommended option reaches people who are in your target area or who show interest in it. If your service covers only one area, that wider reach may bring irrelevant clicks. Google also notes that targeting is not 100% accurate, so review the setting and watch performance.
Why are some searches missing from the search terms report?
Google Ads Help explains that the report leaves out terms with low query volume to protect privacy. As a result, part of your spend can look unexplained. Still, you can add the irrelevant terms you do see as negative keywords. Reviewing the report regularly is the most practical way to cut wasted clicks.
  • google ads
  • account health check
  • conversion tracking
  • search terms
  • optimization score
  • ppc audit
  • ad account
Share:
Talha Aslan

Google Partner digital marketing expert. Hands-on with SEO, Google Ads, web design and e-commerce projects since 2012; every post here comes from that experience.

Next project

Get a quote for your project.

Your brief goes straight to Talha Aslan and team: strategy led by Talha, delivery by an experienced team. We reply the same day and send the scope, timeline and price as a written quote within 1 business day.