Location Bid Adjustments in Google Ads: How to Set Them by Region

Short answer
What are location bid adjustments in Google Ads?
Location bid adjustments are a campaign-level Google Ads setting that raises or lowers your bids by a percentage for users in specific countries, states, cities, or other areas. Used by region, they help you show more often where you convert well and less often where you do not.
This guide focuses on one question: when and how should you bid differently by region? Many advertisers who target the whole country use the same bid everywhere. However, regions differ in conversion rate, order value, and competition. For example, a region with slow shipping may convert less. So one flat bid spreads your budget inefficiently.
We move step by step from reading the location report to setting adjustments, the Smart Bidding limit, and out-of-area clicks. That way your decisions rest on data rather than gut feeling.
One warning first: regional adjustments will not rescue a poorly built campaign. If keywords, ads, or conversion tracking are weak, adjustments only move the problem around. So check the foundation before you fine-tune by geography.
What problem do location bid adjustments solve?
Your budget is limited, and where you spend it shapes results. Without adjustments, the system values a user in every region the same way.
That causes two problems. First, you pay for clicks in regions that rarely convert. Second, you miss impressions in your best regions, because budget runs out elsewhere.
Example scenario: a furniture store offers assembly service in only a few metro areas. Orders from other regions arrive without assembly and see higher return rates. In this case, raising bids where assembly exists and lowering them elsewhere makes sense.
Another example comes from services. A tutoring company offers in-person lessons in large cities and online lessons everywhere else. If in-person lessons are worth more, higher bids in those cities are logical. On the other hand, online lessons serve the whole country, so shutting other regions off would be a mistake. In short, adjustments translate regional differences in your business into your bids.
How does Google officially define location bid adjustments?
The Google Ads Help page About bid adjustments defines them clearly. A location bid adjustment raises or lowers your bid for people in specific countries, cities, or other geographic areas.
The key rules on that page are:
- Location adjustments are available at the campaign level only, not at the ad group level.
- The range runs from minus 90 percent to plus 900 percent.
- Multiple adjustments for the same location are not combined; the most specific location's adjustment applies.
- Smart Bidding strategies do not use manual bid adjustments, but they still respect your targeting and exclusions.
These rules set your boundaries. For example, if your campaign runs on Target CPA, entering percentage adjustments by state changes nothing. So check your bid strategy first. The same page also mentions location asset targeting, which lets you bid differently for customers near your business.
How should you read the location report?
Before deciding by region, you need to see the data. Location reports in Google Ads show performance by the locations you target and by where users actually were or showed interest. Report names can change over time, so follow the relevant location report area in your account.
Focus on clicks, cost, conversions, cost per conversion, and conversion value if you track it. Then sort regions by cost per conversion.
However, never decide from a single column. A region with few clicks can show a very low cost per conversion from just one sale. That number is not statistically reliable. Therefore evaluate regions with enough data separately from regions with little data.
Exporting the report into a spreadsheet makes this easier. For example, write each region's cost per conversion next to the account average. Then mark regions that are clearly better or worse. As a result, you get a short list of candidates for adjustment.
How much data do you need for a regional decision?
Data volume decides how reliable an adjustment is. Adjusting with little data makes you mistake chance for strategy.
We do not give a fixed threshold, because it depends on account volume. Still, a practical rule helps: avoid big adjustments in a region until you see several conversions there. Instead, think of similar regions as a group.
For instance, you can treat several smaller states in one area as a single region. That gives you more data and a sturdier decision. Then, as differences within the group become clear, you can move adjustments down to individual states.
Also keep comparison periods long. Several weeks of data smooth out seasonality and weekday swings. Another option in low-data regions is to leave them alone; the default bid already gives them an average value. In short, patience is the main ingredient of good regional bidding.
How do you calculate the adjustment percentage?
The basic logic is simple: compare a region's performance with the account average.
Example calculation: your account's average cost per conversion is $50. Region A sits at $40 and region B at $65. Because A performs better than average, you could raise its bid. Region B performs worse, so you could lower it. These figures are only an example.
One approach is to divide the average cost by the regional cost and subtract one. For A, 50/40 = 1.25, which suggests roughly a 25 percent increase. For B, 50/65 ≈ 0.77, which suggests roughly a 23 percent decrease. However, do not apply the full result at once. Start with about half and watch what happens.
This method is only a rough starting point, because a higher bid does not always bring proportionally more conversions. We explain how to calculate cost per conversion in our guide on cost per acquisition.
How do you set the adjustment step by step?
Setup takes only a few steps. Menu names can change, so follow the locations area within your campaign settings.
- Select the campaign you want to adjust.
- Open the campaign's locations section.
- Make sure the regions you want to adjust appear as separate targets.
- Find the bid adjustment field in that region's row.
- Enter the increase or decrease percentage and save.
- Record the date and the reason for the change.
Step three matters a lot. For example, if you target only "United States," you need to add the states or cities as separate targets before you can adjust them. As a bonus, reports become clearer by region.
Do not skip step six either. If performance drops later, those notes save a lot of time. The method in our article on finding a performance drop with change history works much better alongside such notes.
What happens if you use Smart Bidding?
This is the most misunderstood part of location bid adjustments. According to Google, Smart Bidding strategies such as Target CPA, Target ROAS, Maximize conversions, and Maximize conversion value do not use manual bid adjustments.
The reason is that the system already considers many signals in every auction, location included. In other words, location still shapes the bid, but the percentage you enter is ignored.
On the other hand, Smart Bidding still respects targeting and exclusions. So if you never want to show in a region, exclude it. If you want to give a region more budget, build a separate campaign for it with its own budget and target.
If you are unsure which strategy fits, see our comparison of Target ROAS and Target CPA. Either way, know your strategy before you spend time on percentages.
Which method works with which bid strategy?
The table below summarizes how to create a regional difference depending on your strategy. Supported settings can change, so confirm the current status on the official page.
| Bid strategy | Percentage adjustment | How to create a regional difference | Watch out for |
|---|---|---|---|
| Manual CPC | Used | Percentage adjustment | Avoid big moves on little data |
| Maximize clicks | Used | Percentage adjustment | Monitor click quality separately |
| Target CPA | Not used | Separate campaign and target | Do not split data too thin |
| Target ROAS | Not used | Separate campaign and target | Conversion values must be accurate |
| Maximize conversions | Not used | Separate budget or exclusion | Watch budget distribution |
| Maximize conversion value | Not used | Separate budget or exclusion | Quality of value data |
The takeaway is clear: with Smart Bidding, campaign structure, not percentages, creates regional differences. However, do not split data into many tiny campaigns. Otherwise the system cannot find enough data to learn from.
Why does the most specific location rule matter?
Google states that multiple adjustments for the same location are not combined; the most specific location's adjustment applies. That rule surprises advertisers who stack adjustments in layers.
For example, imagine a plus 10 percent adjustment for California and plus 20 percent for Los Angeles. For a user in Los Angeles, the adjustments do not multiply. Only the Los Angeles adjustment, plus 20 percent, applies.
So plan parent and child locations together. Do not treat the state adjustment as a base and add the city adjustment on top. Instead, enter the final percentage you want for each location directly.
The same logic applies to zip codes or counties. A smaller area's adjustment replaces the larger one. In practice, the simplest approach is to skip a country-level adjustment and set adjustments only for regions that truly stand out. As a result, you see at a glance which percentage applies where.
Where do clicks from outside your service area come from?
Many local businesses notice clicks from places they do not serve. A common reason is the location option.
According to Google's page About targeting geographic locations, the default advanced location option covers both people physically in your area and people who show interest in it. Physical location comes from IP addresses and, when available and permitted, device signals. Interest comes from signals such as search terms and past searches.
So someone in another state who searches about your city can see your ad. Sometimes that is welcome, for example for hotels or moving services. However, for a plumber who only works on site, those clicks are wasted.
We explain this choice in detail in our article on presence vs interest location targeting. Also note that Google describes location targeting as best effort, not perfectly accurate.
How can you reduce out-of-area clicks?
You cannot bring out-of-area clicks to zero. Still, a few steps reduce them noticeably.
- Switch the location option to people in or regularly in your targeted locations.
- Exclude regions you do not serve.
- Monitor the share of out-of-area clicks in the location report.
- State your service area clearly in your ad copy.
- List the areas you serve on your landing page.
Steps four and five are often skipped. For example, writing "serving the Dallas metro only" in an ad lowers the chance that someone elsewhere clicks. As a result, you protect budget and improve lead quality.
You can also review odd click patterns from an invalid traffic angle. We cover related budget leaks in our article on Google Ads mistakes that waste budget.
Should you exclude a region or use minus 90 percent?
When you do not want to show in a region, you have two options: exclude it or set the lowest adjustment. They do not produce the same result.
An exclusion removes users in that region from targeting entirely. The lowest adjustment only makes your ad appear less often there. Also, under Smart Bidding, the percentage is ignored, while the exclusion still applies.
Which one should you pick? If you never serve that region, an exclusion is cleaner. In contrast, if the region sometimes brings valuable customers but costs too much, a low adjustment under a manual strategy is more flexible.
For example, an online store might bid lower in regions with long shipping times. Yet if customers from those regions turn out loyal, excluding them hurts in the long run. So check repeat purchase behavior before you exclude anyone. In short, the decision depends on whether a region is worthless to you or simply expensive.
What are the most common mistakes with regional adjustments?
The mistakes we see most often come from how people read data, not from the setting itself.
- Making large adjustments on very little data.
- Entering percentages under Smart Bidding and waiting for an effect.
- Assuming state and city adjustments multiply.
- Complaining about out-of-area clicks without checking the location option.
- Changing adjustments often without keeping records.
The second mistake is very common. An advertiser carefully sets adjustments for every state while the campaign runs on Target CPA. Nothing changes, and the advertiser concludes that adjustments do not work. So checking the bid strategy first prevents wasted effort.
The fifth mistake makes analysis impossible. If you change adjustments three times in one week, you cannot tell which change mattered. Therefore wait several weeks after each change and record the result.
How do seasons and weather affect regions?
Regional differences are not fixed. Seasons, holidays, and weather can shift regional performance.
For example, demand in coastal areas may rise in summer and fall in winter. Similarly, for a store selling ski gear, mountain states matter more in winter. In such cases, a year-round adjustment misleads you.
So review adjustments at regular intervals. For short events, you can also consider Google's seasonality adjustments, which we explain in our article on seasonality adjustments.
In short, a regional adjustment is not something you set once and forget. It needs to breathe with your business calendar. A simple yearly calendar noting which regions peak in which months makes future planning easier.
How do ad schedule and location adjustments work together?
Location adjustments do not act alone; they apply alongside settings such as the ad schedule. For example, if a region converts well in the evening, location and time adjustments together help you catch that window.
However, more layers make analysis harder, because separating the effect of each layer becomes difficult. So start with the dimension that creates the biggest difference. In most accounts, that dimension is location.
Then, once location adjustments settle, move on to time adjustments. That way you see the effect of each layer separately. Our guide on ad scheduling explains the time side.
Also, under manual bidding, adjustments interact. Therefore keeping the number of layers modest keeps management simple.
How should ad copy and landing pages match regional bids?
Bid adjustments decide how often your ad shows in each region. Yet whether a person clicks and converts depends on whether the message fits that region.
For example, if you bid high in Phoenix while your ad and landing page mention only Chicago, a Phoenix user will not feel addressed. As a result, the higher bid brings more clicks but a weak conversion rate.
So for key regions, consider adding the city name or service area to your ad copy. Also show region-specific information on the landing page, such as delivery time or the nearest location. That way your bids and your message pull in the same direction.
That said, you do not need a separate page for every region. Often a clear service area section and a delivery table are enough. The goal is to tell users quickly that the service applies where they are.
When does expert support make a difference?
You can set regional adjustments yourself. The steps in this guide are enough to read the location report and make your first changes.
However, some situations get complex. For example, in a Smart Bidding account, creating regional differences means rethinking campaign structure. Or when many regions have little data, deciding which ones to group takes experience.
In our google ads management work, Talha Aslan and team first compare the location report with business data. For instance, we factor in shipping times, service zones, or store locations. That way adjustments rest on how your business actually works, not just on ad data.
Expertise typically matters in three places: choosing which regions deserve separate treatment, building a structure that fits your bid strategy, and measuring effects apart from seasonality. We do not promise results, but we always share the reasoning behind each adjustment.
What changes if you have physical store locations?
For businesses with physical locations, proximity matters as well as region. According to Google's bid adjustment page, location asset targeting lets you bid differently for customers near your business.
For example, if you have two stores in one metro area, bidding higher near each store can make more sense than one bid for the whole area. That way you send customers to the nearest store.
However, this setup requires extra work; your business profile and location assets need to be linked correctly. Your map listing must also show the correct place. If your pin is off, see our guide on fixing a wrong business location on Google Maps.
In short, for store-based businesses, regional adjustments are the first layer and proximity bidding is the second.
Can Smart campaign users adjust bids by region?
Smart campaigns manage many settings automatically to keep setup simple. That simplicity also means fine controls such as regional bid adjustments are limited.
So a business that wants to bid differently by region often considers moving from a Smart campaign to Expert Mode. However, that switch is not right for everyone; it requires management time and know-how.
We explain when the switch makes sense in our related article on switching from a Smart campaign to Expert Mode. Here we only note that the need for regional fine-tuning is one reason to consider it.
Meanwhile, Smart campaigns still let you choose your service area correctly. Therefore fix the area selection first, then judge whether you truly need finer control.
How do you measure the effect of an adjustment?
Do not add new adjustments before you measure the effect of the last one. A simple method is enough.
First, set two periods of equal length before and after the change. Next, compare impressions, clicks, cost, and conversions in the adjusted regions. Then use regions without adjustments as a rough control group.
Example scenario: you raised region A by 15 percent. Two weeks later, conversions there rose while cost per conversion stayed acceptable. Other regions show no clear change. In that case, you can say the adjustment worked.
In contrast, if cost rose and conversions stayed flat, roll the adjustment back. Also check how impression share changed, because that shows whether the bid made a real difference in the auction. To plan your overall budget by region, try our Google Ads budget calculator.
What should a regional bidding checklist include?
Use this short list before you start adjusting by region.
- Does your bid strategy support percentage adjustments?
- Do the regions you want to adjust appear as separate targets?
- Does the location option fit your business model?
- Does each region have enough data?
- Do parent and child location adjustments overlap?
- Have you excluded regions you do not serve?
- Are you recording the date and reason for each change?
If you can answer all seven clearly, you are ready. Otherwise, close the gaps first. That way you read the effect correctly and avoid poor decisions.
We suggest revisiting the list every quarter. As your service area, shipping terms, or store count change, the answers change too. For example, after opening a new location, rethink that region's adjustment and location option.
What should your next step be?
Location bid adjustments are a practical way to steer budget toward the regions that add the most value to your business. To start on your own, read the location report, check your bid strategy, and test small adjustments.
If you use Smart Bidding or have many regions with sparse data, it helps to rethink campaign structure together. Through our google ads agency services, we read your current data first and then discuss which regions deserve separate treatment. You make the call, and we back it with clear reasoning.
For a quick check of your account's foundation before regional fine-tuning, start with our Google Ads audit tool.
Core guide: What Is Digital Marketing? Its types, examples and how it is done, on one page with an interactive film that travels through the brain.



